A stitched surround view
Combine the front, rear, left and right cameras into a single view around the vehicle.
Visibility / AVM · 360 View
Every side.
One
clear view.
See around the vehicle in a single surround view. AI-AVM combines panoramic video, road-user detection and recording to support low-speed maneuvers.
AI-AVM360° Surround view
See the whole picture.
Four cameras. Panoramic AI detection.
360°Panoramic view
and pedestrian detection
and pedestrian detection
4KUHD video recording
in the AVM solution
in the AVM solution
Dual CPUAI and AVM
in one system
in one system
01 / Around-view monitoring
A view that stays
with the road user.
Bring the four sides together so the driver can understand where people are moving around the vehicle.
Panoramic pedestrian detection
Track vulnerable road users across the surround view and alert when they approach a dangerous area.
Vehicle-body transparency
The 3D transparent-body visualization helps the driver understand the area around the vehicle.
Video and AI together
The dual-CPU architecture combines AVM, AI detection and up to 4K UHD recording.
02 / Everyday maneuvers
Start. Turn. Reverse.
Keep the surroundings in view.
Select a maneuver, then play the recorded demonstration. Each view is shown in its original proportions.
Select a maneuver
The view for
the next move.
Explore the original camera-view demonstrations for four everyday driving actions.
Start
See immediately ahead before moving off.
03 / Image quality and readiness
Daylight detail.
After-dark awareness.
Explore the original surround-view and day/night footage, then see the AVM startup sequence.
Startup timing is the demonstration shown in the product presentation; actual timing depends on system configuration and operating conditions.
04 / Installation workflow
Calibrate the view.
In a few clicks.
See the setup workflow used to align the camera images into a consistent surround view.
Position the four cameras
Mount the cameras at the front, rear, left and right of the vehicle.
Calibrate the surround view
Follow the guided workflow to align the camera images around the vehicle.
Verify before handover
Check the stitched view, detection coverage, monitor behavior and alerts on the installed vehicle.
05 / Standalone system
Four cameras.
A complete surround view.
Choose a camera layout around the vehicle and connect the display and warning devices for local driver assistance.
AI and AVM in one system.
The standalone architecture connects four CA51 fisheye cameras, an AI-AVM unit, a display, an external warning device and a GPS antenna.
Four CA51 fisheye cameras
Front, rear, left and right camera views.
AI-AVM unit
Panoramic AI detection and UHD video recording.
In-cab surround view
A 360° surround-video view for the driver.
Warning device
An alert when a pedestrian approaches a dangerous area.
GPS antenna
GPS / BeiDou positioning.
Vehicle installation
A standalone system, with compatible dashcam/recorder integration available.
Four fisheye cameras
Capture each side of the vehicle.
AI-AVM processing
Stitch the view, detect and record.
Display + warning
Give the driver visibility and alerts.
06 / Display options
Put the view
in front of the driver.
Compare the wider Streamax monitor portfolio. Confirm monitor compatibility and the interface required for the selected AVM configuration.
DP7S
7-inch · Wired
DP7Q-RT
7-inch · Touch & recording
DP7Q-WT
7-inch · Wireless
DP12S
12.3-inch · A-pillar
| Monitor | DP7S | DP7Q-RT | DP7Q-WT | DP12S |
|---|---|---|---|---|
| Application | Single-view assistance | Four-channel visibility | Wireless visibility | CMS / BSIS & MOIS |
| Display | 7-inch · 1024 × 600 | 7-inch · 1024 × 600 | 7-inch · 1024 × 600 | 12.3-inch · 1920 × 720 |
| Viewing mode | Single channel | Four-way split | Four-way split | Two-way split |
| Video inputs | 4 × 1080P wired | 4 × 1080P wired | 4 × 1080P wireless | 1 × 1080P wired |
| Touch / storage | No / No | Yes / Yes | Yes / Yes | No / No |
| Mounting | Dashboard | Dashboard | Dashboard | A-pillar |
The quad-input monitor presentation specifies an 800 cd/m² IPS panel, automatic dimming, an 85° viewing angle, mixed analog/AHD inputs, N9M recording and a supercapacitor for safe shutdown. Select the monitor and interfaces for the final camera configuration.
07 / Plan the deployment
Configure the system
around your fleet.
Use the vehicle and operating environment to define camera coverage, alerts and the driver’s display.
Plan the installation
Start with the vehicle.
Then define the view.
Confirm the vehicle and camera positions
Define vehicle dimensions, body shape, mounting heights and camera locations before choosing the final installation.
Choose the display and alerting
Confirm the display interface, mounting location, desired views and in-cab or exterior alerts for the operation.
Check system integration
The presentation supports standalone operation and compatible dashcam/recorder integration. Confirm the selected hardware, firmware and recording requirements.
Calibrate and check the coverage
Complete camera calibration, inspect the stitched view and verify detection and warning behavior on the installed vehicle before handover.
Explore the visibility family
Looking for focused blind-spot detection?
Explore C53 cameras, CMS20 digital side mirrors and wireless rear-visibility options for the areas that matter to your fleet.